|
|
Daily Tasks
| Accompany aircraft on flights in order to make in-flight adjustments and corrections. | | Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. | | Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment. | | Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels. | | Clean, refuel, and change oil in line service aircraft. | | Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding. | | Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts. | | Conduct routine and special inspections as required by regulations. | | Cure bonded structures, using portable or stationary curing equipment. | | Determine repair limits for engine hot section parts. | | Disassemble engines, and inspect parts such as turbine blades and cylinders for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment. | | Examine and inspect aircraft components, including landing gear, hydraulic systems, and de-icers to locate cracks, breaks, leaks, or other problem. | | Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft. | | Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders. | | Inspect airframes for wear or other defects. | | Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation. | | Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches. | | Inventory and requisition or order supplies, parts, materials, and equipment. | | Listen to operating engines to detect and diagnose malfunctions such as sticking or burned valves. | | Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules. | | Maintain repair logs, documenting all preventive and corrective aircraft maintenance. | | Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, and seals. | | Measure parts for wear, using precision instruments. | | Measure the tension of control cables. | | Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications. | | Obtain fuel and oil samples, and check them for contamination. | | Prepare and paint aircraft surfaces. | | Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components. | | Read and interpret pilots' descriptions of problems in order to diagnose causes. | | Reassemble engines following repair or inspection, and re-install engines in aircraft. | | Remove or cut out defective parts, or drill holes in order to gain access to internal defects or damage, using drills and punches. | | Remove or install aircraft engines, using hoists or forklift trucks. | | Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks. | | Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment. | | Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and lubricating moving parts. | | Spread plastic film over areas to be repaired in order to prevent damage to surrounding areas. | | Test operation of engines and other systems, using test equipment such as ignition analyzers, compression checkers, distributor timers, and ammeters. | | Trim and shape replacement body sections to specified sizes and fits, and secure sections in place, using adhesives, hand tools, and power tools. |
Daily Work Activities
| Adhere to safety procedures. | | Adjust or set mechanical controls or components. | | Align vehicle frame. | | Align or adjust clearances of mechanical components or parts. | | Align or adjust clearances of vehicle body parts or components. | | Use aviation electronics. | | Apply cleaning solvents. | | Apply adhesives, caulking, sealants, or coatings. | | Apply filler substances to dents in vehicle bodies. | | Make independent judgment in assembly procedures. | | Follow vehicle repair procedures. | | Identify properties of metals for repair or fabrication activities. | | Climb ladders, scaffolding, or utility or telephone poles. | | Build or repair structures in construction, repair, or manufacturing setting. | | Diagnose mechanical problems in machinery or equipment. | | Repair aircraft ignition or ignition systems. | | Repair commercial transportation equipment. | | Repair aircraft propulsion systems. | | Dismantle or reassemble rigging. | | Erect scaffold. | | Fabricate sheet metal parts or items. | | File, sand, grind, or polish metal or plastic objects. | | Maintain or repair cargo or passenger vehicle. | | Lay out machining, welding or precision assembly projects. | | Fabricate aircraft parts. | | Apply protective coating to products. | | Move or fit heavy objects. | | Use electronic calibration devices. | | Use engine diagnostic equipment. | | Operate forklift. | | Operate lathes. | | Use lifting equipment in vehicle repair setting. | | Use precision measuring tools or equipment. | | Operate sheet metal fabrication machines. | | Operate vehicle engine electrical system test equipment. | | Read blueprints. | | Read specifications. | | Read schematics. | | Read technical drawings. | | Read vehicle manufacturer's specifications. | | Understand service or repair manuals. | | Understand technical operating, service or repair manuals. | | Recognize characteristics of metals. | | Repair sheet metal products. | | Repair vehicle body parts. | | Test mechanical products or equipment. | | Use auto or vehicular body repair equipment. | | Use electrical or electronic test devices or equipment. | | Use hand or power tools. | | Set up and operate variety of machine tools. | | Use pneumatic tools. | | Use precision measuring devices in mechanical repair work. | | Use voltmeter, ammeter, or ohmmeter. | | Use x-ray or magnetic inspection techniques. | | Determine project methods and procedures. | | Repair or replace electrical wiring, circuits, fixtures, or equipment. | | Laminate objects. | | Identify base metals for welding. | | Maintain welding machines or equipment. | | Perform safety inspections in industrial, manufacturing or repair setting. | | Recognize characteristics of alloys. | | Use acetylene welding/cutting torch. | | Use knowledge of metric system. | | Weld together metal parts, components, or structures. | | Operate pneumatic test equipment. | | Use knowledge of welding filler rod types. | | Solder metal parts or components together. | | Overhaul vehicle major operating units, such as engines or transmissions. | | Conduct tests to locate mechanical system malfunction. | | Repair or replace malfunctioning or worn mechanical components. | | Examine products or work to verify conformance to specifications. | | Lubricate machinery, equipment, or parts. | | Cut metal or plastic. | | Test electrical/electronic wiring, equipment, systems or fixtures. | | Observe or listen to machinery or equipment operation to detect malfunctions. | | Diagnose malfunctioning vehicle systems. | | Fabricate, assemble, or disassemble manufactured products by hand. | | Stretch, bend, straighten, shape, pound, or press metal or plastic. | | Use soldering equipment. | | Use arc welding equipment. | | Determine installation, service, or repair needed. | | Determine material or tool requirements. | | Assemble, dismantle, or reassemble equipment or machinery. | | Use machine tools in installation, maintenance, or repair. | | Operate hoist, winch, or hydraulic boom. | | Inspect machinery or equipment to determine adjustments or repairs needed. | | Read work order, instructions, formulas, or processing charts. |
Other Work Activities
| Analyzing Data or Information | Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts. | | Communicating with Supervisors, Peers, or Subordinates | Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. | | Controlling Machines and Processes | Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles). | | Documenting/Recording Information | Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form. | | Establishing and Maintaining Interpersonal Relationships | Developing constructive and cooperative working relationships with others, and maintaining them over time. | | Evaluating Information to Determine Compliance with Standards | Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards. | | Getting Information | Observing, receiving, and otherwise obtaining information from all relevant sources. | | Handling and Moving Objects | Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things. | | Identifying Objects, Actions, and Events | Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events. | | Inspecting Equipment, Structures, or Material | Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects. | | Making Decisions and Solving Problems | Analyzing information and evaluating results to choose the best solution and solve problems. | | Monitor Processes, Materials, or Surroundings | Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems. | | Operating Vehicles, Mechanized Devices, or Equipment | Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or water craft. | | Organizing, Planning, and Prioritizing Work | Developing specific goals and plans to prioritize, organize, and accomplish your work. | | Performing General Physical Activities | Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials. | | Processing Information | Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data. | | Repairing and Maintaining Electronic Equipment | Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles. | | Repairing and Maintaining Mechanical Equipment | Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles. | | Thinking Creatively | Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions. | | Updating and Using Relevant Knowledge | Keeping up-to-date technically and applying new knowledge to your job. |
|
|
|
|
Schools Offering Degrees for
Aircraft Mechanics and Service Technicians |
 | Universal Technical Institute - National | Online | | | Wyotech | Campus | Bedford, MA 01730 | | Ridley Lowell Business and Technical Institute | Campus | New London, CT 06320 | | Today's Tec | Campus | Wallingford, CT 06492 | | NetCom Information Technology | Campus | New York, NY 10118 | | Vaughn College of Aeronautics and Technology | Campus | Flushing, NY 11369 | | Sanford-Brown Institute | Campus | Melville, NY 11747 | | Pittsburgh Institute of Aeronautics | Campus | West Mifflin, PA 15122 | | Metropolitan Career Center Computer Technology Institute | Campus | Philadelphia, PA 19110 | | Nextec | Campus | Herndon, VA 20170 | | National College of Business and Technology | Campus | Harrisonburg, VA 22802 | | National College of Business and Technology | Campus | Charlottesville, VA 22901 | | National College of Business and Technology | Campus | Martinsville, VA 24114 | | National College of Business and Technology | Campus | Salem, VA 24153 | | National College of Business and Technology | Campus | Lynchburg, VA 24502 | | National College of Business and Technology | Campus | Danville, VA 24540 | | National College of Business and Technology | Campus | Bluefield, VA 24605 | | Embry Riddle Aeronautical University | Campus | Daytona Beach, FL 32114 | | FastTrain | Campus | Jacksonville, FL 32256 | | Everglades University | Campus | Orlando, FL 32807 | | IT Micronet | Campus | Orlando, FL 32809 | | IT Micronet | Campus | Melbourne, FL 32935 | | Florida Career College | Campus | Hialeah, FL 33012 | | Florida Career College | Campus | Pembroke Pines, FL 33024 | | FastTrain | Campus | Pembroke Pines, FL 33028 | | ATI Career Training Center | Campus | Miami, FL 33122 | | FastTrain | Campus | Miami, FL 33134 | | Florida Career College | Campus | Miami, FL 33174 | | FastTrain | Campus | Kendall, FL 33176 | | ATI Career Training Center | Campus | Oakland Park, FL 33309 | | ATI Career Training Center | Campus | Fort Lauderdale, FL 33309 | | FastTrain | Campus | Ft. Lauderdale, FL 33311 | | Florida Career College | Campus | Lauderdale Lakes, FL 33319 | | Florida Career College | Campus | West Palm Beach, FL 33417 | | Everglades University | Campus | Boca Raton, FL 33431 | | FastTrain | Campus | Tampa, FL 33607 | | National Aviation Academy A & P School | Campus | Clearwater, FL 33760 | | FastTrain | Campus | Clearwater, FL 33761 | | Chattanooga College - Medical, Dental and Technical | Campus | Chattanooga, TN 37411 | | National College of Business and Technology | Campus | Knoxville, TN 37919 | | National College of Business and Technology | Campus | Louisville, KY 40216 | | National College of Business and Technology | Campus | Danville, KY 40422 | | National College of Business and Technology | Campus | Lexington, KY 40508 | | National College of Business and Technology | Campus | Stow, OH 44224 | | Pittsburgh Institute of Aeronautics | Campus | Vienna, OH 44473 | | National College of Business and Technology | Campus | Youngstown, OH 44505 | | National College of Business and Technology | Campus | Cincinnati, OH 45237 | | National College of Business and Technology | Campus | Kettering, OH 45420 | | National College of Business and Technology | Campus | Indianapolis, IN 46250 | | Michigan Institute of Aviation and Technology | Campus | Belleville, MI 48111 | | New Horizons Computer Learning Centers | Campus | Livonia, MI 48154 | | New Horizons Computer Learning Centers | Campus | Flint, MI 48507 | | New Horizons Computer Learning Centers | Campus | East Lansing, MI 48823 | | New Horizons Computer Learning Centers | Campus | Kalamazoo, MI 49002 | | New Horizons Computer Learning Centers | Campus | Grand Rapids, MI 49546 | | Kaplan University | Campus | Des Moines, IA 50323 | | Kaplan University | Campus | Mason City, IA 50401 | | Kaplan University | Campus | Cedar Falls, IA 50613 | | Kaplan University | Campus | Cedar Rapids, IA 52404 | | Kaplan University | Campus | Davenport, IA 52807 | | Minneapolis Business College | Campus | Roseville, MN 55113 | | Coyne American Institute Inc | Campus | Chicago, IL 60607 | | Missouri Tech | Campus | Saint Louis, MO 63132 | | Wichita Technical Insitute | Campus | Joplin, MO 64804 | | Wichita Technical Institute | Campus | Topeka, KS 66609 | | Wichita Technical Institute | Campus | Wichita, KS 67213 | | Kaplan University | Campus | Lincoln, NE 68508 | | Lamson Institute | Campus | San Antonio, TN 78238 | | Mountain Air Helicopters | Campus | Logan, UT 84321 | | San Joaquin Valley College | Campus | Bakersfield, CA 93309 | | San Joaquin Valley College - Fresno Aviation Campus | Campus | Fresno, CA 93727 | | Wyotech | Campus | Oakland, CA 94621 | | MTI College | Campus | Sacramento, CA 95841 |
|
|
Career
Assessment
Want to take a fresh look at which careers best fit your skills and interests? Wonder if your current career is a good fit for you,
or if it is time for a career reboot? Invest 15 minutes of your time and get priceless insight into which careers are best for you.
The Onveon Career Assessment Tool is brought to you through a collaborative process involving Onveon.com, Education Counseling Professsionals, Psychologists,
Government Agencies, Colleges, Universities and Vocational Schools. It will reveal the careers that will keep you satisfied in the long run and will assist
you in connecting with the right education and training to reach your goals.
|
|
|
 |
|
|
|
|