The passenger airline industry is undergoing many changes, with some airlines posting increases in passenger traffic and adding routes while others are cutting back. Overall, the employment of aircraft pilots is projected to increase about as fast as average for all occupations through 2014. In the long run, demand for air travel is expected to grow along with the population and the economy. In the short run, however, employment of pilots is generally sensitive to cyclical swings in the economy. During recessions, when a decline in the demand for air travel forces airlines to curtail the number of flights, airlines may temporarily furlough some pilots.

After September 11, 2001, air travel was severely depressed. A number of the major airlines were forced to reduce schedules, lay off pilots, and even declare bankruptcy. At the same time, hiring continued at regional and low-fare airlines. Job opportunities are expected to continue to be better with the regional airlines and low-fare carriers, which are growing faster than the more well-known major airlines. Opportunities with air cargo carriers also should arise because of increasing security requirements for shipping freight on passenger airlines and growth in electronic commerce. Business and corporate travel also should provide some new jobs for pilots. Pilots attempting to get jobs at the major airlines will face strong competition, as those firms tend to attract many more applicants than they have jobs. They also will have to compete with laid-off pilots for any available jobs.

Pilots who have logged the greatest number of flying hours using sophisticated equipment typically have the best prospects. For this reason, military pilots often have an advantage over other applicants. However, prior to September 11, 2001, some airlines reported a shortage of qualified pilots to operate the most sophisticated aircraft. Thus, when hiring improves, jobseekers with the most FAA licenses will have a competitive advantage. Fewer flight engineers will be needed as new planes requiring only two pilots replace older planes that required flight engineers. Pilots also will experience some productivity improvements as airlines switch to larger planes and adopt the low-fare carrier model that emphasizes faster turnaround times for flights, keeping more pilots in the air rather than waiting on the ground.

Pilots are highly trained professionals who either fly airplanes or helicopters to carry out a wide variety of tasks. Most are airline pilots, copilots, and flight engineers who transport passengers and cargo, but 1 out of 5 pilots is a commercial pilot involved in tasks such as dusting crops, spreading seed for reforestation, testing aircraft, flying passengers and cargo to areas not served by regular airlines, directing firefighting efforts, tracking criminals, monitoring traffic, and rescuing and evacuating injured persons. Except on small aircraft, two pilots usually make up the cockpit crew. Generally, the most experienced pilot, the captain, is in command and supervises all other crew members. The pilot and the copilot, often called the first officer, share flying and other duties, such as communicating with air traffic controllers and monitoring the instruments. Some large aircraft have a third pilot, the flight engineer, who assists the other pilots by monitoring and operating many of the instruments and systems, making minor in-flight repairs, and watching for other aircraft. The flight engineer also assists the pilots with the company, air traffic control, and cabin crew communications.

New technology can perform many flight tasks, however, and virtually all new aircraft now fly with only two pilots, who rely more heavily on computerized controls. Before departure, pilots plan their flights carefully. They thoroughly check their aircraft to make sure that the engines, controls, instruments, and other systems are functioning properly. They also make sure that baggage or cargo has been loaded correctly. They confer with flight dispatchers and aviation weather forecasters to find out about weather conditions en route and at their destination. Based on this information, they choose a route, altitude, and speed that will provide the safest, most economical, and smoothest flight. When flying under instrument flight rules, procedures governing the operation of the aircraft when there is poor visibility, the pilot in command, or the company dispatcher, normally files an instrument flight plan with air traffic control so that the flight can be coordinated with other air traffic. Takeoff and landing are the most difficult parts of the flight, and require close coordination between the pilot and first officer. For example, as the plane accelerates for takeoff, the pilot concentrates on the runway while the first officer scans the instrument panel. To calculate the speed they must attain to become airborne, pilots consider the altitude of the airport, outside temperature, weight of the plane, and speed and direction of the wind. The moment the plane reaches takeoff speed, the first officer informs the pilot, who then pulls back on the controls to raise the nose of the plane. Pilots and first officers usually alternate flying each leg from takeoff to landing.

Unless the weather is bad, the flight itself is relatively routine. Airplane pilots, with the assistance of autopilot and the flight management computer, steer the plane along their planned route and are monitored by the air traffic control stations they pass along the way. They regularly scan the instrument panel to check their fuel supply; the condition of their engines; and the air-conditioning, hydraulic, and other systems. Pilots may request a change in altitude or route if circumstances dictate. For example, if the ride is rougher than expected, pilots may ask air traffic control if pilots flying at other altitudes have reported better conditions; if so, they may request an altitude change. This procedure also may be used to find a stronger tailwind or a weaker headwind to save fuel and increase speed.

In contrast, because helicopters are used for short trips at relatively low altitude, helicopter pilots must be constantly on the lookout for trees, bridges, power lines, transmission towers, and other dangerous obstacles. Regardless of the type of aircraft, all pilots must monitor warning devices designed to help detect sudden shifts in wind conditions that can cause crashes. Pilots must rely completely on their instruments when visibility is poor. On the basis of altimeter readings, they know how high above ground they are and whether they can fly safely over mountains and other obstacles. Special navigation radios give pilots precise information that, with the help of special maps, tells them their exact position. Other very sophisticated equipment provides directions to a point just above the end of a runway and enables pilots to land completely without an outside visual reference. Once on the ground, pilots must complete records on their flight and the aircraft maintenance status for their company and the FAA. The number of nonflying duties that pilots have depends on the employment setting.

Airline pilots have the services of large support staffs and, consequently, perform few nonflying duties. However, because of the large numbers of passengers, airline pilots may be called upon to coordinate handling of disgruntled or disruptive passengers. Pilots employed by other organizations, such as charter operators or businesses, have many other duties. They may load the aircraft, handle all passenger luggage to ensure a balanced load, and supervise refueling; other nonflying responsibilities include keeping records, scheduling flights, arranging for major maintenance, and performing minor aircraft maintenance and repairs. Some pilots are flight instructors. They teach their students in ground-school classes, in simulators, and in dual-controlled planes and helicopters. A few specially trained pilots are examiners or check pilots. They periodically fly with other pilots or pilot's license applicants to make sure that they are proficient.